Specialized S-Works Stumpjumper 2022

Frame

• Saddle Clamp: Alloy, 38.6mm
• Frame: FACT 11m carbon chassis and rear-end, asymmetrical design, 29 Trail Geometry, SWAT™ Door integration, flip chip Head Tube/Bottom Bracket adjustment, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 130mm of travel

Suspension

• Fork: FOX FLOAT 34 Factory, GRIP2 damper, Kashima Coating, 15x110mm, 44mm offset, 140mm of travel
• Rear Shock: FOX FLOAT DPS Factory, Rx Trail Tune, EVOL Air sleeve, Kashima Coat, 3-position adjustment w/ Open Mode Adjustment, 190x45mm

Cockpit

• Saddle: Bridge, 155/143mm, Hollow Ti-rails
• Handlebar Stem: Deity, 35.0mm Bore (S1-S2: 35mm length, S3-S6: 50mm length)
• Grips: Deity, Knuckleduster, Black
• Seatpost: RockShox Reverb AXS, 30.9, 1X remote, (S1:100mm, S2: 125mm, S3: 150mm, S4-S6: 170mm)
• Handlebar: Roval Traverse SL Carbon, riser bar, 6-degree upsweep, 8-degree backsweep, 30mm rise, 780mm, 35.0mm

Brakes

• Rear Brake: SRAM G2 Ultimate, 4-piston caliper, hydraulic disc, 180mm
• Front Brake: SRAM G2 Ultimate, 4-piston caliper, hydraulic disc, 200mm

Transmission

• Bottom Bracket: SRAM DUB, BSA 73mm, Threaded
• Shift Levers: SRAM Eagle AXS Rocker Paddle
• Chain: SRAM XX1 Eagle
• Rear Derailleur: SRAM XX1 Eagle AXS
• Crankset: SRAM XX1 Eagle, DUB, S1:165mm, S2-S5: 170mm, S6: 175mm
• Cassette: Sram XG-1299, 12-Speed, 10-52t
• Gear Ratio: Alloy, 30T

Wheels

• Front Tire: Butcher, GRID casing, GRIPTON® T9 compound, 29x2.3"
• Rear Hub: DT Swiss 240, Ratchet EXP, 36t engagement, SRAM XD driver body, 12mm thru-axle, 148mm spacing, 28h
• Front Hub: DT Swiss 240, sealed cartridge bearings, 15x110mm spacing, 28h
• Spokes: DT Swiss Competition Race
• Rear Tire: Purgatory, GRID casing, GRIPTON® T7 compound, 29x2.3"
• Rims: Roval Control 240, hookless carbon, 29mm inner width, hand-built, 2Bliss Ready
• Inner Tubes: Standard, Presta Valve